Reset Displacement now also resets the gap.This fixes a bug where reloading a sample cut from a larger model would not work if the sample had regions that were failing in tension for a while and had large gaps.
11
jul. 27, 2017
Added ability to reset calibration test properties.
10
jun. 29, 2017
Flat joint peak strength archived.
9
jun. 23, 2017
Added option to reset flat joint peak strength via "Reset" dialog.
Flat joint material properties: added residual and peak strength.
8
jun. 5, 2017
Bug fix: few nodes at the bottom of the model were not properly marked as fixes fixed. Corner nodes now are marked fixed in the X and Y direction.
Bug fix on Flat Joint model with no fluid.
7
mar. 9, 2017
When running in command line mode, creates file named "cout.txt" in the current directory that contains a log created during the execution. The command line now has the following parameters: Usage: srmtools300_64 -in filename [-msg] [-srmlab]" Required parameters:
in filename specifies the configuration XML filename Optional parameters:
msg (display a dialog box at the end simulation with content of the file "cout.txt")
srmlab (run the srmlab option)
6
mar. 2, 2017
Code now can run from the command line: srmtools300_64 -in filename. The configuration file must have a set of batch steps defined and the last batch step must save the simulation.
Added export history to batch item.
5
feb. 17, 2017
Bug fix in the flat joint model when used with variable resolution.
Added ability to specify a shear plate gap for the direct shear test .
4
ene. 18, 2017
Bug fix: routine that imports MoFrac joints was not converting normal and shear stiffness from GPa/m to the code internal unit (Pa/m).
3
ene. 12, 2017
Added capability to heal fractures via Reset Lattice dialog and batch mode.
Added ability to fixity plot item to display the faces where loads will be applied for calibration tests.
SRMLab:
Fixed Boundary Conditions for Direct Shear Test (X-fixity on left face).
Slope Model:
Added ability to trim the lattice and allow code to perform calibration tests.
2
nov. 4, 2016
Internal release only
Fixed time step calculation and calibration parameters (for stiffness and strength) to allow use of the flat joint model with the regular lattice (non Voronoi).
The micro-crack counter will be set to a spring with flat joint contact when the first contact breaks and not when all contacts break.
Removed restriction on the code to allow the following (all) combinations of spring distribution and joint type:
Voronoi + Flat Joint
Voronoi + Linear Joint
Regular Lattice + Flat Joint
Regular Lattice + Linear Joint
1
nov. 4, 2016
Modified the force-displacement function for flat-joint model. Also, adjusted calibration stiffness and strength parameters.
When Voronoi tessellation is set, automatically the flat joint model is also set.
0
oct. 24, 2016
Version 3.0 released.
Code optimization for flat joint model.
Movie sampling interval is now being saved/restored to/from settings.
Default history sample interval set to 100.
Save/restore time step.
Fixed units for movie sampling interval.
Fixed microcracks plot item when flat joints is used.
Micro-crack reset counter behavior has changed: The increment for the spring microcrack counter will mark the last set of broken springs the highest count number (current counter). The first set of broken springs has counter equal to 1. Springs counter is market with a global counter whenever a spring is broken.
Changed range of valid values (0.01 to 1.1) for Flat Joint Radius Multiplier field.
Itasca has announced the release of FLAC2D v9 Itasca has announced the release of FLAC2D v9, revolutionizing the way we analyze and predict... Leer mas
Primer Anuncio 6º Simposio Itasca sobre Modelado Numérico Aplicado se llevará a cabo del 3 al 6... Leer mas
6th Itasca Symposium on Applied Numerical Modeling The next Itasca Symposium will take place June 3 - 6, 2024, in Toronto, Canada.... Leer mas
Próximos Eventos
23sept.
Getting Started with FLAC2D/FLAC3D
This training is an introduction to continuous modeling with FLAC2D and FLAC3D. At the end of the course, participants will master the ...
Leer mas
14oct.
Getting Started with 3DEC
Live Online Introductory Training Course.
October 14-15, 2025...
Leer mas
2dic.
NEW TRAINING: Meshing in ITASCA Software
This introductory training course offers a comprehensive foundation in geotechnical modeling, enabling participants to identify various...
Leer mas