Featured Project

Modelamiento de la Excavación de dos Túneles que se Intersectan

Project Description

In the framework of the extension of the Meuse/Haute‐Marne Underground Research Laboratory (France), Itasca Consultants SAS was commissioned by EIFFAGE to verify the tunnel stability and the design of the support structures installed during the excavation of two intersecting tunnels (Figure 1).In the framework of the extension of the Meuse/Haute‐Marne Underground Research Laboratory (France), Itasca Consultants SAS was commissioned by EIFFAGE to verify the tunnel stability and the design of the support structures installed during the excavation of two intersecting tunnels (Figure 1).

Itasca's Role

The Itasca software FLAC3D was used. Both the short term and the long term behavior of the host argillite were accounted for in the model, using a hardening ‐ softening Hoek‐Brown constitutive model paired with the viscoplastic Lemaître law.

The real 1 meter long excavation sequential steps were explicitly simulated in FLAC3D, followed by the installation of sliding steel arches and radial bolts. Front stability is ensured by fiberglass bolts, installed at the tunnel face and renewed as the excavation proceeds. After each step, a creep duration of 2 days is simulated. A special steel structure fitting the intersection geometry is installed at the end of the first tunnel excavation, to carry the soil load and provide additional stability to this zone before the excavation of the second tunnel.

After the completion of both excavations, the long term behavior of the intersection over a creep time of 20 years is simulated. Figure 2 presents model results at the end of the simulation.

Project Results

The long term results have mainly allowed validating the design of the intersection support structure, with computed stresses smaller than the allowable ones. Also, force resultants in bolts and steel arches are seen to be compatible with corresponding material strength, thus proving the sufficient design of the support structures.

Project Image(s)

Figure 1 : (a) FLAC3D model and (b) steel arches and intersection support structure geometry
Figure 2 : Results of simulation for a creep time of 20 years: (a) soil displacement contour and (b)verification of stresses within the intersection structure elements
Oficina

France
Itasca Consultants S.A.S.

Industrias

Ingeniería Civil

Nombre del Cliente

Eiffage

Ubicación

France

Software

FLAC3D